Stainless steel pipe manufacturers explain the welding method of pipe fittings

Published on:

2020-12-11

Stainless steel pipe manufacturer - stainless steel pipe fitting is a kind of pipe fitting with stainless steel pipe inserted into the socket of pipe fitting, and then argon arc welding is made along the edge of pipe fitting. It is the most reliable connection mode among all connection modes. The inner diameter of pipe socket is equal to the outer diameter of pipe.

1、 Stainless steel pipe manufacturer - butt welding type　　　

Butt welding of stainless steel pipe fittings is to weld the stainless steel pipe and pipe fittings along the butt joint by a circle of argon arc welding.

The outer diameter of pipe socket is the outer diameter of pipe.

Butt welding is generally used for the welding of stainless steel pipe system with large specification.

2、 Manufacturer of stainless steel pipe fittings - compression fittings

It has the characteristics of reliable and safe connection, convenient and fast construction, suitable for embedded installation, maintenance free update and relatively superior economy.

The working principle of the clamping type pipe fitting is to insert the thin-wall stainless steel pipe into the socket of the compression type pipe fitting, and use the special clamping tool to clamp the stainless steel pipe in the pipe fitting. The cross-section shape of the clamping position is hexagonal. In addition, there is an O-ring seal between the stainless steel pipe and the pipe fitting, so that it has the characteristics of anti leakage, anti drawing, anti vibration and high pressure resistance. Therefore, it is an advanced connector in direct drinking water system, tap water system, heating system, steam system, industrial oil pipe system and industrial gas pipe system. Suitable for water, oil, gas pipeline connection.