News Detail

Six technical requirements for the installation of stainless steel ball valves

分类：NEWS CENTER
作者：Kelly Lee
来源：
发布时间：2020-05-26
访问量：0

【概要描述】Six technical requirements for the installation of stainless steel ball valves

Six technical requirements for the installation of stainless steel ball valves

【概要描述】Six technical requirements for the installation of stainless steel ball valves

分类：NEWS CENTER
作者：Kelly Lee
来源：
发布时间：2020-05-26
访问量：0

详情

1. The stainless steel sheet ball valve needs to be purged with nitrogen for at least 1 minute after assembly;
2. The airtightness test must use pure nitrogen;
3. Encapsulate after passing the airtightness test and seal with a clean polyethylene cap. The polyethylene cap should be soaked in organic solvent before use and wiped clean;
4. Then use vacuum bag to seal;
5. Packing;
6. Finally, the correct method must be taken during transportation to ensure that the product will not be damaged.

关键词：

扫二维码用手机看

PREV: Selection Principles and Instructions for Selection of Disc Type Ball Valves

NEXT: Why is the one-piece ball valve the most cost-effective of the ball valves?

PREV: Selection Principles and Instructions for Selection of Disc Type Ball Valves

NEXT: Why is the one-piece ball valve the most cost-effective of the ball valves?